The car lights got changes as well. Now the grand Cherokee has an H11 Low beam bulb or D1S headlights that perform for both beams. The H11 bulb is a single filament one and can be upgraded with one of our HID or LED kits. The installation is pretty simply and hard-wiring free. The High beams require the 9005 bulb size. by Ducatiguy » 10 Jan 2019, 11:52. [quote=Rattnalle post_id=493063 time=1547097503 user_id=95783] The low beams are the running lights. The high beams are both the elevated low beams and the separate second bulb in the round reflector. If that one doesn't work it's time to start checking fuses and the like. [/q. Either send an email to info@dapperlighting.com or call us at (415) 493-8236. High beam/Low beam function is specific to 4-headlamp or 2-headlamp systems. Dapper Lighting’s 2-Headlight systems all use solenoid controlled High/Low projectors. Unlike 4-headlamp systems that have a separate housings designed for both high beam AND low beam, 2 Bi-Xenon refers to using the HID Xenon lights as both the high beam and low beam. The way a Xenon projector works is it uses a shield inside the projector to limit the light output to only the road and mask the light above a certain level. This ensures you do not blind oncoming traffic. A Bi-Xenon light has a motor inside of it that can move High beams not working! Right after I've changed the BCM (5K0 937 087 AB), test everything again, FOBs worked, Xenons worked BUT high beams won't. I've tried almost everything read on threads but no luck. I'm using Kufatec's adapters. Tuesday 24th November 2015. Our A6 is with a local garage having some new shocks, springs, anti roll bars and a service carried out. They've reported the work has been done but the full beams aren Location. Hungary. Hi Folks, I really need your help to solve my high beam issue on my VW Passat CC 2012 Facelift. (358) 2.0 L 147kw. The story is the following: I have bought used VW Passat CC some months ago and I realized after couple of days the high beam does not work. Also I figured out later on, the car was imported from USA to Europe BI-XENON HEADLIGHTS MODULE: FUNCTION. Xenon headlights are comprised of the gas discharge lamp, the xenon ballast, and the reflection and projector-type system. Bi-Xenon means that high beam and low beam are realised by a projection module. This has the advantage that only one ballast is required. This means that two light distributions with a Hi folks, Joined the forum to ask some advice on a project I'm working on. I have fitted bi-xenon projectors in my car that used to use a two bulb set up for the high/low beams. The low main beam halogen bulb has been replaced by an HID bulb and comes on with the usual switch and the high beam KwwTi.

bi xenon high beam not working